The Accu-Print High-Tech HL™ four-post flatbed press combines a European-designed print head with top-tier engineering attributes, including: a patented stroke length adjustment with up-front computer controls; a unique ink recovery system that optimizes ink usage; an independent carriage stroke and four-post lift drive; electro-mechanical brake; four point masterframe lock-in; and a stand alone control panel for easy positioning. The unit’s solid construction is further enhanced by a heavy-duty belt drive carriage for smooth squeegee action; a brushless vacuum motor for quiet, maintenance-free operation; and A.W.T.’s industry-leading Remote Diagnostics feature for instant service worldwide.
Features
Press Diagnostics & Productivity Interface
Instant, on-board trouble shooting with productivity enhancement programming. Screens include basic press information, automatic error messages and individual job status. Works with remote phone modem to reduce downtime and maximize service turnaround.
Electronic trouble shooting minimizes downtime.
Automatic error message display.
Interactive job status screens include quantity printed and stroke length parameters.
Quantity Mode feature stops the press automatically when the job is complete.
Reciprocating Vacuum Bed and Take-Off System
The grippers activate when needed to grip your material and hold it in place. The bed then reciprocates out into the load position for very easy delivery of material onto the vacuum bed in perfect register. The operator no longer needs to stick his head under the print head to feed the stock. As the vacuum bed moves out, the substrate drops onto the belt Take-Off system, and is transported to the dryer. This system operates smoothly and quietly, handling a wide range of substrates including paper, plastics, masonite and metals.
World-Wide direct service instantly via remote telephone modem hook-up
Phone modem feature provides a direct communication link between the High-Tech on-board micro-processor and the central A.W.T.'s diagnostics computer for instant worldwide service. Local PC hook-up in customer plant is not required.
Fast identification and correction of malfunction sources.
Remote downloading of software upgrades.
ADDITIONAL STANDARD FEATURES
New chopper assembly with squeegee/flood bar independent four air cylinders pressure system with solid non-deflection extruded bar. Additional cylinders can be added
New control technology for accurate stroke positioning and minimal over-running
Instant remote diagnostic phone modem interface
Automatic parallel peel system
Head raises up to 18"
For easy screen cleaning
Patented up-front computer controlled stroke setting
Sets stroke quickly up-front without moving sensors
Super micro-registration system
New bearing actuated system provides precise registration, with tolerances to +/- .002" with no "backlash"
Advanced ink recovery system
Shifts Squeegee beyond preset stroke lengths to recover ink in the well
Pneumatic squeegee pressure equalizer
Automatically levels squeegee/floodbar pressure across the substrate
Four post head lift
Print on material up to 1" thick
Independent carriage stroke and head lift drive
Assures smooth, even print stroke
Belt driven heavy duty ball bearing print carriage
Ensures quiet trouble-free / vibration-free operation
Tool free squeegee/flood bar pressure adjustment
Easy access to micro-calibrated knobs
Squeegee/flood bar angle adjustments
For absolute print control on challenging jobs
Independent squeegee and flood bar speeds
An essential print quality control feature
Sliding pneumatic and manual screen clamps
For fast setup and changeover of different size screens
Front or rear carriage stop mode.
Toggle switch on the main control panel stops carriage in flood ( solvent system ) or non-flood ( UV curable ) mode
Off-Contact Control:
Easily accessible.
"0" off-contact
Allows minimal off-contact settings to take advantage of today's high performance, high tension screens
Master frame accepts all types of frames.
Accepts all frame types, including roller-frames; high lift for easy cleaning
New tool free peel rate setting
Allows easy access and infinite adjustment to the automatic peel system
New tool free position setting for front and rear screen holders
Excellent to accommodate smaller screen sizes
Reciprocating vacuum bed
For easy placement of substrate on vacuum bed of press, in register
All-Aluminum vacuum table
2" thick table with the heaviest gauge plate in the industry.
Adjustable vacuum and blowback
For easy stock removal
Take-Off System
Smooth delivery of stock to dryer
Brush-free, maintenance free vacuum motor
Is the quietest in the industry.
Three-Way mode selection
Timer, Jog and Foot Pedal selections available
Variable speed take-off
Adjust speed to match conventional or UV dryer conveyors
STANDARD SAFETY FEATURES
- Motorized off-contact
- Dial indicators for registration
- Pre-registration pin system
- Solvent vapor exhaust system placed under vacuum bed or over print head
- Disappearing Guides
- Double print feature
|
Specifications
ACCU-PRINT HIGH-TECH HL WITH TAKE-OFF
| Cat. No |
Max Print Area |
Cycle Speed Range |
Electrical |
Amps |
HP |
Min Air req. |
| APHTHL-2230 |
22"x30"
(56x76cm)
Rear Take-Off |
Up to 1000 iph |
220 V, 1 Ph, 60 Hz |
15 |
2 |
100 psi
4 cfm |
| APHTHL-3040 |
30"x40"
(76x102cm)
Rear Take-Off |
Up to 900 iph |
230 V, 3 Ph, 60 Hz |
15 |
2 |
100 psi
6 cfm |
| APHTHL-3650 |
36"x50"
(91x127cm)
Rear Take-Off |
Up to 650 iph |
230 V, 3 Ph, 60 Hz |
15 |
2 |
100 psi
6 cfm |
| APHTHL-3855 |
38"x55"
(96x140cm)
Rear Take-Off |
Up to 650 iph |
230 V, 3 Ph, 60 Hz |
15 |
2 |
100 psi
6 cfm |
| APHTHL-4464 |
44"x64"
(112x163cm) |
Up to 550 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-5280 |
52"x80"
(132x203cm) |
Up to 500 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-5296 |
52"x96"
(132x244cm) |
Up to 450 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-52124 |
52"x124"
(132x315cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-6284 |
62"x84"
(157x213cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-6296 |
62"x96"
(157x244cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-68124 |
68"x124"
(173x315cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
Max. Print Thickness - 1" (2.54cm) / Min Frame O.D. - 19" ( 49 cm )
220 V, 1 Ph, 50 & 60 Hz models also available
** Minimum 25 cfm, 3 HP compressor required for operation with Take-Off
ACCU-PRINT HIGH-TECH HL WITHOUT TAKE-OFF
| Cat. No |
Max Print Area |
Cycle Speed Range |
Electrical |
Amps |
HP |
Min Air req. |
| APHTHL-2230NTO |
22"x30"
(56x76cm) |
Up to 1000 iph |
220 V, 1 Ph, 60 Hz |
15 |
2 |
100 psi
4 cfm |
| APHTHL-3040NTO |
30"x40"
(76x102cm) |
Up to 900 iph |
230 V, 3 Ph, 60 Hz |
15 |
2 |
100 psi
6 cfm |
| APHTHL-3650NTO |
36"x50"
(91x127cm) |
Up to 650 iph |
230 V, 3 Ph, 60 Hz |
15 |
2 |
100 psi
6 cfm |
| APHTHL-3855NTO |
38"x55"
(96x140cm) |
Up to 650 iph |
230 V, 3 Ph, 60 Hz |
15 |
2 |
100 psi
6 cfm |
| APHTHL-4464NTO |
44"x64"
(112x163cm) |
Up to 550 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-5280NTO |
52"x80"
(132x203cm) |
Up to 500 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-5296NTO |
52"x96"
(132x244cm) |
Up to 450 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-52124NTO |
52"x124"
(132x315cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-6284NTO |
62"x84"
(157x213cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-6296NTO |
62"x96"
(157x244cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
| APHTHL-68124NTO |
68"x124"
(173x315cm) |
Up to 400 iph |
230 V, 3 Ph, 60 Hz |
20 |
3.5 |
100 psi
6 cfm |
Max. Print Thickness - 1" ( 2.54 cm ) / Min Frame O.D. - 19" ( 49 cm )
220 V, 1 Ph, 50 & 60 Hz models also available
** Minimum 25 cfm, 3 HP compressor required for operation with Take-Off
Options & Accessories
| Cat. No |
Description |
| APHTHL-GR |
Extra gripper assembly for High Tech HL Four Post Take-Off |
| APHTHL-PG |
Pneumatically operated disappearing feeding guides |
| APHTHL-MOS |
Motorized off-contact system |
| APHTHL-PS |
Squeegee / Floodbar pneumatic support cylinders |
| APHTHL-DFAF |
Double foot pedal air flow control system |
| APHTHL-SPP |
Spare parts package |
| APHTHL-DI |
Dial indicators for micro registration |
Product Literature 
|
