A.W.T.'s new High-Tech Mini flat-bed printer is a high performance press in a smaller format. Offering many of the operational advantages of larger High-Tech models, the High-Tech Mini features independent carriage stroke and head lift drives for smooth, vibration free cycling at high production speeds. Combined with tubular steel, heavy duty chassis, belt drive heavy duty ball bearing print carriage and ultra quiet, maintenance free vacuum motor, this state of the art machine delivers big features with a small print area.

The universal master frame accepts all frame types and disengages from the printing head for fast set-up and cleaning. Ball bearing head lock-in provides pinpoint registration for close tolerance printing. The "0" off-contact capability allows this press to make the most of today's high tension screens. Optional parallel peel is also available.

For optimum print quality control, the pneumatic squeegee pressure level pressure across the substrate. Squeegee and flood bar pressures are easily set using tool free micro-calibrated knobs. A three-point micro-registration system is standard.

Safety features include wrap-around safety bar to protect the operator on three sides, plus a head up/down feature to raise the head independently, without cycling the carriage.


Features

World-Wide direct service instantly via remote telephone modem hook-up
Phone modem feature provides a direct communication link between the High-Tech on-board micro-processor and the central A.W.T.'s diagnostics computer for instant worldwide service. Local PC hook-up in customer plant is not required.

  • Fast identification and correction of malfunction sources.
  • Remote downloading of software upgrades.

    Super three-point-micro-registration system
    With target grid assures accurate multi-color registration repeatability

    Heavy duty tubular steel chassis frame
    Provides extra stability for smooth operation

    New exclusive peel system
    Up front easy to access controls

    Independent head lift and carriage drive
    Dedicated drives assure vibration free print cycling

    Front or rear carriage stop mode.
    Toggle switch on the main control panel stops carriage in flood ( solvent system ) or non-flood ( UV curable ) mode

    Universal masterframe.
    Accepts all frame types, including roller-frames; disengages from support arms for better access during set-up and cleaning

    Four Point Off-Contact Control
    Easily accessible turnbuckle settings and rear screen holder height adjustments

    Four Point masterframe lock-in
    Ball-bearing head lock for the tightest repeatable registration performance

    New tool free position setting for front and rear screen holders
    Excellent to accommodate smaller screen sizes

    Exclusive dual sensor stroke adjustment
    For fast, accurate stroke length settings and no over running even at high printing speeds

    All aluminum vacuum table
    2" thick table with the heaviest gauge plate in the industry top and bottom.

    Brush-free, maintenance-free vacuum motor
    Is the quietest in the industry

    "0" off-contact
    Allows minimal off-contact settings to take advantage of today's high performance, high tension screens

    Independent squeegee and flood bar speeds
    An essential print quality control feature

    Squeegee/flood bar angle adjustments
    For absolute print control on challenging jobs

    Independent carriage stroke and head lift drive
    Assures smooth, even print stroke

    Belt drive heavy duty ball bearing print carriage
    Ensures quiet trouble-free / vibration-free operation

    Wrap around safety bar with Lift-BackTM
    Protects operator with four point micro-switch protection


Specifications

Cat. No

Max Print Area

Cycle Speed Range

Electrical

 Amps Min Air Req.
APHT-1626M

16" x 26"
( 41 x 66 cm)

 Up to 1,000 iph 115 V, 1 Ph, 60 Hz
or
220 V, 1 Ph, 50 Hz		 13 100 psi
4 cfm
APHT-2230M

22" x 30"
( 56 x 76 cm )

 Up to 1,000 iph 115 V, 1 Ph, 60 Hz
or
220 V, 1 Ph, 50 Hz		 15 100 psi
4 cfm
APHT-2538M

25" x 38"
( 64 x 97 cm )

 Up to 1,000 iph 115 V, 1 Ph, 60 Hz
or
220 V, 1 Ph, 50 Hz		 15 100 psi
4 cfm
APHT-3040M

30" x 40"
( 76 x 102 cm )

 Up to 1,000 iph 115 V, 1 Ph, 60 Hz
or
220 V, 1 Ph, 50 Hz		 15 100 psi
4 cfm

 

Max. Print Thickness  -  1" ( 2.54 cm )    /    Min Frame O.D.  -  19" ( 49 cm )
220 V, 1 Ph, 50 Hz models also available
25 cfm, 3 HP compressor required for operation with Take-Off

Options & Accessories

Cat. No Description
APHT-TO26M Take-Off for Accu-Print High-Tech Micro 16" x 26"
APHT-TO30M Take-Off for Accu-Print High-Tech Micro 22" x 30"
APHT-TO38M Take-Off for Accu-Print High-Tech Micro 25" x 38"
APHT-TO40M Take-Off for Accu-Print High-Tech Micro 30" x 40"
APHT-ABBM Automatic Blowback
APHT-PGM Pneumatically operated guides
APHT-PSFM Pneumatic Squeegee / Floodbar "U" Clamps
APHT-FPCM Sliding front pneumatic clamps
APHT-RPCM Sliding rear pneumatic clamps
APHT-VVBM Variable timing for vacuum & blowback
APHT-PPOM Parallel peel option
APHT-SPPM Spare parts package