Transmatic Products

 GFO 67/76/104/126 Sublimation   

GFO Series Rotary Heat Transfer Printer

From the beginning you will notice the difference. More than 30 years experience manufacturing rotary heat presses has allowed us to refine the design and add extra features. Upon receipt of the machine – Lifting bolts atop allow the machine to be safely removed from the enclosed crate. Start-up of production – Three super-light air shafts allow one person to pick up and position the transfer paper, fabric and blotting tissue (when required). The transfer paper is located directly above the entrance into the machine, allowing gravity to help feed straight and evenly. Unwind tension is adjustable with pneumatic tension control. The fabric is pulled straight up and through an “S” wrap bar that applies additional tension to the fabric. From the “S” wrap, the fabric travels over an adjustable roller to ensure a straight path into the entrance of the machine. Rewinding of transfer paper and the printed fabric – Most importantly, the paper and fabric are separated immediately upon exit from the machine and transported to the rear of the machine for easy access to the materials and their corresponding rewinds. Air shafts are used to support the rolls, but the mounts are designed for one person to be able to both remove finished rolls and drop in empty shafts and cores. A pneumatic clutch and individual speed controls are used to control tension. The GFO series is CE certified which guarantees it to meet or exceed safety standards throughout the world.

• Oil heated drum w/2 zone control
• Production 3.5 ft/min at 40 second Dwell Time / 1,07 m/min
• Safety bar & reversing control
• 13 inch (33cm) Diameter Drum
• Adjustable Belt Tension
• Brush less DC Motors
• Electro-pneumatic Belt steering System
• Automatic Cool-Down Timer
• 3 super-light Air Unwind shafts & 3 super-lite Air Rewind shafts
• Optional roll up table loading
• Variable speed control
• CE Certified
• The machine needs air connection