HIX Corporation

Heat Press Equipment > Mug Presses & Hat Presses



Mug Glazer

    Manual
Mug Glazer© Fast Facts
  • For CLC and photo transfers.
  • Cures transfers onto mugs after they have been transferred in a mug press.
  • Long lasting heat element, no dangerous breakable bulb heater.
  • Makes the mug artwork sharp, colorful, glossy, and smooth.
  • Timer and start button.
  • On/off switch and heat indicating light.
  • Temperature is preset.
Mug Glazer© Specs
  • Box Size
    • 11"x9"x7"(28x23x18 cm)
  • Shipping Weight 6 lbs. (2.7 kg)
  • Amps/Watts (120v) 4.5 / 500
  • Amps/Watts (220v) 2.5 / 500

Mug Glazer© Overview

Gives Laser transfers the sublimated "look" that is so desired.

The MG-500 Mug Glazer is essential to cure laser transfers onto a mug after they have been applied with the mug press such as the HIX EP-565. There are also some limited inkjet/bubble-jet and thermal wax transfers that are also essential to post cure.

Easy to operate, a mug is put into the Glazer where the heating element heats the mug from the inside/out, melting the clear outer mug coating just enough to fuse the toner on the mug surface.

The MG-500 has an auto-reset electronic timer and start switch for easy use and consistent results. The 500 watt heat rod is more powerful, lasts longer, and is safer than quartz bulb type glazers which tend to break, burst, or burn out.