HIX Corporation

Heat Press Equipment > Air Automatic

N-880 & 680D

N-880D & N-680D N-880D & N-680D   N-880D & N-680D

N-880D & N-680D© Fast Facts

  • N-880D: 16"x20", N-680D: 15"x15".
  • Digital timer is adjustable up to 999 seconds.
  • Full adjustable pressure control (pneumatic) Up to 89 PSI of inline pressure.
  • Calibrated digital temperature adjustable to 450F.
  • Deep over-slip for dressing shirt.
  • Lower the handle to start the automatic cycle.
  • Long lasting pneumatic air cylinder lift system.
  • Applies all types of transfers on items up to 3/4" thick.
  • Air compressor and water separation trap required.
  • ETL-US certified with lifetime warranty on heating element.

N-880D & N-680D© Specs
  1. N-880D
    • 16"x20" Platen (40.6x50.8cm)
    • Box Size 41"x20"x15" (104x51x38cm)
    • Shipping Weight 137lbs (63kg)
    • Amps/Watts (120v) 14.5 / 1750
    • Amps/Watts (220v) 10 / 2000
    • optional pre-press switch

  2. N-680D
    • 15"x15" Platen (38.1x38.1cm)
    • Box Size 41"x20"x15" (104x51x38cm)
    • Shipping Weight 126lbs (57kg)
    • Amps/Watts (120v) 12.5 / 1500
    • Amps/Watts (220v) 7.5 / 1560
    • optional pre-press switch

N-880D & N-680D© Overview

Both the 16"x20" N-880D and 15"x15" N-680D semi automatic (clamshell) presses help reduce operator fatigue in long production runs. They are also very useful in heavy traffic tourist retail shops where numerous garment types, such as sweats and T-shirts, are continuously being produced. The N-680D & N-880D both come with the optional pre-press switch.

  • The N-680D is the same as the N-880D below except that it has a 15"x15" heat platen.
  • The N-880D is a commercial grade air operated machine with a 16"x20" (surface area) heat platen. It is built with a long lasting pneumatic air cylinder lift system, a stronger air valve for faster clamping, and bushings at hinge points for durability. This all makes this machine more suitable for extra high volume work.

    When the upper platen is lowered by hand, it will trip a micro switch just before closure, and the machine will take over applying your preset pressure. At the end of the preset time, the machine will open automatically for you. Because it is air operated, you can set the amount of pressure on the machine and it will adjust automatically to the product no matter what the thickness.