EGX-30 Desktop Engraver Specifications
MODEL |
EGX-30 |
Table Size |
12" x 8-1/16". (305 mm (X) x 205 mm (Y)) |
Max. Operation Area |
12" x 8-1/16". (305 mm (X) x 205 mm (Y)) |
Feed Rate |
118-1/16". (X, Y-axis: Max. 3.0 m)/min. (1-15/16" (50 mm)/sec.) |
Mechanical Resolution |
0.000394". (0.01 mm)/step 0.0000492" (0.00125 mm)/step ( micro-step control ) |
Software Resolution |
0.000394" (0.01 mm)/step |
Distance Accuracy |
Whichever the greater value of 0.00394" (0.1 mm) or 0.5% of moving distance |
Right-Angle Accuracy |
12-1/16" ( 0.0394") (1 mm (305 mm)) |
Spindle Motor |
15 W ( DC motor ) |
Revolution Speed |
5,000 to 10,000 rpm |
Engraving Tool Mounting Diameter |
3.175 mm (1/8") |
Interface |
Parallel (in compliance with the specification of Centronics) Serial (under RS-232C standard) Automatic switching |
Instruction System |
CAMM-GL II mode2 |
Power Consumption |
0.6 A / 117 V 0.4 A / 220 to 230 V 0.4 A / 230 to 240 V |
Acoustic Noise Level |
Operation mode: 70 dB (A) or less Standby mode: 40 dB (A) or less (According to ISO 7779) |
External Dimensions |
20-1/4" (W) x 19-3/8" (D) x 8-9/16" (H)(513 mm (W) x 491 mm (D) x 217 mm (H) ) |
Weight |
15.5 kg (34.2 lb.) |
Operation Temperature |
5 to 40 C (41 to 104 F) |
Operation Humidity |
(35 to 75% ( no condensation ) |
Accessories |
Power cord: 1, Dust collector hose and duct: 1, Engraving cutter: 1, Engraving-tool holder: 1, Diamond cutter adapter: 1, Hexagonal screw driver: 1, Spanner: 1, Hexagonal wrench: 1, Test
material: 1, Adhesive sheet for securing material: 1, Roland Software package CD-ROM: 1, User's manual: 1 |
|
|